A flow chart as one of tools improving the quality of repair and construction work

Introduction. Nowadays, improving the quality of repair-construction works is an important complex problem, insufficient attention to which inevitably leads to their increasing cost, increasing operational costs, increasing the number of current and overhaul repairs, as well as reducing the time between repairs, worsening the quality of life of consumers. In the worst cases, poor quality of repair and construction works can lead to the accidents, become a source of threat to life and health, leading to accidents. The quality of work — is the main purpose of using the technological card; this standardized organizational and technological document contains detailed instructions for the working staff, allowing to understand all the processes to be carried out during the project as well as to evaluate the resources necessary for this. The process map contains a set of measures for the organisation of work with the most efficient use of modern means of mechanisation, technological equipment, tools and fixtures. This document includes the most progressive and rational methods of construction works technology facilitating reduction of time and improvement of work quality and reduction of their cost. The technological card ensures not only economical and high quality, but also safe execution of works, as it contains regulatory requirements and safety rules.

Materials and methods. The task is to analyse flow charts for different types of work in major repairs with the identification of a list of shortcomings, errors and inaccuracies in drawing up flow charts.

Results. Proposals for correcting basic data and parameters in the flow charts required for operational control of the technological process have been developed.

Conclusions. A list of flow charts for different types of work during major repairs has been analysed; a list of shortcomings, errors and inaccuracies in drawing up flow charts that require adjustments has been identified.

1. Hill D. The impact of technological maps on the quality of construction and repair projects. International Journal of Project Management. 2021; 39(2):174-183. DOI: 10.1016/j.ijproman.2020.07.009

2. Ershov M.N. Organizational and technological solutions during the reconstruction of public buildings in operation. Moscow, DIA, 2013; 168. (rus.).

3. Korol E.A., Dekhtyar E.V., Timofeeva E.A. Scientific and methodological approaches to the formation of measures to improve the technology and organization of repair and construction work. Current problems of the construction industry and education : Collection of reports of the First National Conference (September 30, 2020). Moscow, 2020; 328-332. (rus.).

4. Korol O.A., Kuznetsov G.S. Multiple criteria analysis in major repair of multi-family houses. Real estate: economics, management. 2017; 1:57-61. URL: https://elibrary.ru/item.asp?id=29993255 (rus.).

5. Baiburin A.Kh. Comprehensive Quality Assessment of Construction and Installation Works. Bulletin of SUSU : ser. “Construction and Architecture”. 2005; 3:13(53):68-70. (rus.).

6. Kuznetsov A.N. Development of methods for analyzing indicators of technological processes to improve the quality of construction products : dis. … cand. techn. Sciences. Moscow, 2005. (rus.).

7. Korol O.A. Conceptual foundations of the regulatory framework of capital repairs of common property in apartment houses. CEB : Construction Equipment Bulletin. 2018; 11(1011):20-21. (rus.).

8. Mailyan V.D. Selection of technical and organizational and technological solutions of repair and construction production in the field of housing and communal services and the urban environment : author. dis. Ph.D. technical. Rostov-on-Don, 2020; 24. (rus.).

9. Kagan P.B., Barabanova T.A. Improving the development of technological maps in construction. Stroitel’stvo: nauka i obrazovanie [Construction: Science and Education]. 2012; 4:5. URL: http://www.nso-journal.ru (rus.).

10. Barabanova T.A. Trends in the use of techno­logy in the construction of maps. Scientific and Technical Volga region Bulletin. 2012; 5:97-99. URL: https://elibrary.ru/item.asp?id=17977959 (rus.).

11. Udovichenko O.K. Improving the development of technological cardsin construction. Scientific Achievements and Discoveries of Modern Youth : collection of articles of the winners of the international scientific and practical conference : in 2 parts (Penza, February 17, 2017). Penza, 2017; 185-188. URL: https://elibrary.ru/item.asp?id=28410436 (rus.).

12. Lapidus A.A., Makarov A.N. A risk-based approach to construction control applied by a developer. Vestnik MGSU [Monthly Journal on Construction and Architecture]. 2022; 17(2):232-241. DOI: 10.22227/1997-0935.2022.2.232-241 (rus.).

13. Lee K., Park S. The use of technological maps in improving quality control in construction and repair projects. Journal of Construction Engineering and Management. 2019; 145(11):04019014. DOI: 10.1061/(ASCE)CO.1943-7862.0001793

14. Yang D., Li Y. The use of technological maps in construction and repair projects : a review. Journal of Construction Engineering and Management. 2019; 145(3):04019007. DOI: 10.1061/(ASCE)CO.1943-7862.0001722

15. Grakhova N.A. Features of quality control in the construction industry. Young Scientist. 2018; 16:117-119. URL: https://moluch.ru/archive/202/49554/ (rus.).

16. Dementieva A.K., Evtyukhina A.A. Process charts in construction. University science in modern conditions : collection of materials of the 54th scientific and technical conference. In 3 h. Volume Part 2. (Ulyanovsk, January 27–February 1, 2020). Ulyanovsk, 2020; 31-33. URL: https://elibrary.ru/item.asp?id=43990919&pff=1 (rus.).

17. Savchenko V.Y., Zelik D.I. On the usefulness of the application of technological charts in construction. NITs Vestnik Nauki. 2020; 29-34. URL: https://elibrary.ru/item.asp?id=42856378 (rus.).

18. Cheng Y., Zhang J. The benefits of implementing technological maps in construction and repair projects. Journal of Construction Management and Economics. 2020; 38(10):755-764. DOI: 10.1080/01446193.2020.1832371

19. Chen H., Chen Y. The effectiveness of technological maps in enhancing quality control in construction and repair projects. Journal of Construction Management and Economics. 2018; 36(6):547-558. DOI: 10.1080­/01446193.2018.1495433Kuo C., Lin C. The Importance of Technological Maps in Improving Quality Control in Construction and Repair Projects. Journal of Construction Management and Economics. 2017; 35(2):121-131. DOI: 10.1080/01446193.2016.1247907

20. Kuo C., Lin C. The importance of technological maps in improving quality control in construction and repair projects // Journal of Construction Management and Economics. 2017; 35(2);121-131. DOI: 10.1080/01446193.2016.1247907